USETEXTLINKS = 1  
STARTALLOPEN = 0
HIGHLIGHT = 0
PERSERVESTATE = 0
WRAPTEXT = 1

ICONPATH = 'http://wellsconcrete.server293.com/details/images/' //change if the gif's folder is a subfolder, for example: 'images/'


var counterI = 0
function insFldX(parentOb, childOb)
{
  childOb.xID = 'X' + counterI;
  counterI--;
  return insFld(parentOb, childOb)
}
function insDocX(parentOb, childOb)
{
  childOb.xID = 'Y' + counterI;
  counterI--;
  return insDoc(parentOb, childOb)
}
function insertExtraFolder(parentOb)
{

}

foldersTree = gFld("Menu")
foldersTree.treeID = "big"
foldersTree.xID = 'X0'; 
counterI--;

auxroot = insFldX(foldersTree, gFld("Details"))

auxroot2 = insFldX(foldersTree, gFld("Specifications"))
aux1b = insFldX(auxroot2, gFld("View Specifications <A HREF='details/Specifications.pdf' TARGET = '_Blank'>(<U>Acrobat PDF</U>) </A> "))

aux1 = insFldX(auxroot, gFld("BI Details (Inverted Tee Beam)"))
aux2 = insFldX(aux1, gFld("BI brg full on column <A HREF='details/BI Details (Inverted Tee Beam)/BI brg full on column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BI Details (Inverted Tee Beam)/BI brg full on column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux3 = insFldX(aux1, gFld("Dble BI&#39s brg on top of column <A HREF='details/BI Details (Inverted Tee Beam)/Dble BI&#39s brg on top of column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BI Details (Inverted Tee Beam)/Dble BI&#39s brg on top of column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux4 = insFldX(aux1, gFld("BI&#39s on double column haunch <A HREF='details/BI Details (Inverted Tee Beam)/BI&#39s on double column haunch.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BI Details (Inverted Tee Beam)/BI&#39s on double column haunch.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux5 = insFldX(aux1, gFld("BI&#39s on single column haunch <A HREF='details/BI Details (Inverted Tee Beam)/BI&#39s on single column haunch.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BI Details (Inverted Tee Beam)/BI&#39s on single column haunch.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux6 = insFldX(aux1, gFld("Cantilever BI on column <A HREF='details/BI Details (Inverted Tee Beam)/Cantilever BI on column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BI Details (Inverted Tee Beam)/Cantilever BI on column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux7 = insFldX(aux1, gFld("BI brg half on column - future expansion <A HREF='details/BI Details (Inverted Tee Beam)/BI brg half on column - future expansion.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BI Details (Inverted Tee Beam)/BI brg half on column - future expansion.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux8 = insFldX(auxroot, gFld("BR Details (Rectangular Beam)"))
aux9 = insFldX(aux8, gFld("Single BR brg full on top of column <A HREF='details/BR Details (Rectangular Beam)/Single BR brg full on top of column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BR Details (Rectangular Beam)/Single BR brg full on top of column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux10 = insFldX(aux8, gFld("Two BR&#39s brg on top of column <A HREF='details/BR Details (Rectangular Beam)/Two BR&#39s brg on top of column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BR Details (Rectangular Beam)/Two BR&#39s brg on top of column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux11 = insFldX(aux8, gFld("BR on double column haunch <A HREF='details/BR Details (Rectangular Beam)/BR on double column haunch.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BR Details (Rectangular Beam)/BR on double column haunch.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux12 = insFldX(aux8, gFld("BR on single column haunch <A HREF='details/BR Details (Rectangular Beam)/BR on single column haunch.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BR Details (Rectangular Beam)/BR on single column haunch.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux13 = insFldX(aux8, gFld("Cantilever beam <A HREF='details/BR Details (Rectangular Beam)/Cantilever beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/BR Details (Rectangular Beam)/Cantilever beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux14 = insFldX(auxroot, gFld("Pocket Beam"))
aux15 = insFldX(aux14, gFld("Isometric detail <A HREF='details/Pocket Beam/Isometric detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Pocket Beam/Isometric detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux16 = insFldX(auxroot, gFld("Flat Wall Panels"))
aux17 = insFldX(aux16, gFld("Bottom Connections"))
aux18 = insFldX(aux17, gFld("Flat panel to foundation exterior connection <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to foundation exterior connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to foundation exterior connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux19 = insFldX(aux17, gFld("Flat panel to foundation detail - future expansion <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to foundation detail - future expansion.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to foundation detail - future expansion.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux20 = insFldX(aux17, gFld("Flat panel to footing detail - tied to floor <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to footing detail - tied to floor.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to footing detail - tied to floor.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux21 = insFldX(aux17, gFld("Flat panel to footing detail - typical <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to footing detail - typical.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to footing detail - typical.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux22 = insFldX(aux17, gFld("Flat panel to foundation detail - typical <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to foundation detail - typical.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Bottom Connections/Flat panel to foundation detail - typical.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux23 = insFldX(aux16, gFld("Corners"))
aux24 = insFldX(aux23, gFld("Outside butt corner detail <A HREF='details/Flat Wall Panels/Corners/Outside butt corner detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Corners/Outside butt corner detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux25 = insFldX(aux23, gFld("Inside butt corner detail <A HREF='details/Flat Wall Panels/Corners/Inside butt corner detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Corners/Inside butt corner detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux26 = insFldX(aux23, gFld("Shiplap corner detail <A HREF='details/Flat Wall Panels/Corners/Shiplap corner detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Corners/Shiplap corner detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux27 = insFldX(aux23, gFld("Shiplap corner with concrete column detail <A HREF='details/Flat Wall Panels/Corners/Shiplap corner with concrete column detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Corners/Shiplap corner with concrete column detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux28 = insFldX(aux16, gFld("Load Bearing"))
aux29 = insFldX(aux28, gFld("Flat panel DT bearing in scallop detail <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel DT bearing in scallop detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel DT bearing in scallop detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux30 = insFldX(aux28, gFld("Flat panel joist bearing on shelf angle <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel joist bearing on shelf angle.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel joist bearing on shelf angle.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux31 = insFldX(aux28, gFld("Flat panel joist bearing in scallop <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel joist bearing in scallop.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel joist bearing in scallop.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux32 = insFldX(aux28, gFld("Flat panel DT bearing - high low condition <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel DT bearing - high low condition.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel DT bearing - high low condition.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux33 = insFldX(aux28, gFld("Flat panel with joist bearing - high low roof in pockets <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel with joist bearing - high low roof in pockets.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel with joist bearing - high low roof in pockets.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux34 = insFldX(aux28, gFld("Flat panel joist bearing - high low with scallop and ledge angle <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel joist bearing - high low with scallop and ledge angle.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel joist bearing - high low with scallop and ledge angle.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux35 = insFldX(aux28, gFld("Flat panel with hollow core bearing on face angle <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel with hollow core bearing on face angle.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Load Bearing/Flat panel with hollow core bearing on face angle.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux36 = insFldX(aux16, gFld("Non-Load Bearing"))
aux37 = insFldX(aux36, gFld("Flat panel with non load bearing DT <A HREF='details/Flat Wall Panels/Non-Load Bearing/Flat panel with non load bearing DT.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Non-Load Bearing/Flat panel with non load bearing DT.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux38 = insFldX(aux36, gFld("Flat panel with starter joist <A HREF='details/Flat Wall Panels/Non-Load Bearing/Flat panel with starter joist.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Non-Load Bearing/Flat panel with starter joist.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux39 = insFldX(aux36, gFld("Flat panel with deck angle <A HREF='details/Flat Wall Panels/Non-Load Bearing/Flat panel with deck angle.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Non-Load Bearing/Flat panel with deck angle.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux40 = insFldX(aux36, gFld("Overhead flat panel with DT on beam <A HREF='details/Flat Wall Panels/Non-Load Bearing/Overhead flat panel with DT on beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Non-Load Bearing/Overhead flat panel with DT on beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux41 = insFldX(aux36, gFld("Overhead panel with starter joist <A HREF='details/Flat Wall Panels/Non-Load Bearing/Overhead panel with starter joist.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Non-Load Bearing/Overhead panel with starter joist.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux42 = insFldX(aux36, gFld("Overhead panel with non bearing DT <A HREF='details/Flat Wall Panels/Non-Load Bearing/Overhead panel with non bearing DT.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Non-Load Bearing/Overhead panel with non bearing DT.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux43 = insFldX(aux16, gFld("Overhead panel conditions"))
aux44 = insFldX(aux43, gFld("Overhead load bearing panel - flats only <A HREF='details/Flat Wall Panels/Overhead panel conditions/Overhead load bearing panel - flats only.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Overhead panel conditions/Overhead load bearing panel - flats only.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux45 = insFldX(aux43, gFld("Overhead panel hanging connection <A HREF='details/Flat Wall Panels/Overhead panel conditions/Overhead panel hanging connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Overhead panel conditions/Overhead panel hanging connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux46 = insFldX(aux43, gFld("Overhead panel with steel tube <A HREF='details/Flat Wall Panels/Overhead panel conditions/Overhead panel with steel tube.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Wall Panels/Overhead panel conditions/Overhead panel with steel tube.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux47 = insFldX(auxroot, gFld("Double Tee Roof "))
aux48 = insFldX(aux47, gFld("Double Tee on Concrete Beams"))
aux49 = insFldX(aux48, gFld("Coped DT bearing on L-beam <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/Coped DT bearing on L-beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/Coped DT bearing on L-beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux50 = insFldX(aux48, gFld("Coped DT bearing on inverted tee beam <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/Coped DT bearing on inverted tee beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/Coped DT bearing on inverted tee beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux51 = insFldX(aux48, gFld("DT bearing on beam <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT bearing on beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT bearing on beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux52 = insFldX(aux48, gFld("DT bearing on split ledge inverted tee beam <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT bearing on split ledge inverted tee beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT bearing on split ledge inverted tee beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux53 = insFldX(aux48, gFld("DT bearing on L-beam <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT bearing on L-beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT bearing on L-beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux54 = insFldX(aux48, gFld("DT cantilever with tapered end on beam <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT cantilever with tapered end on beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT cantilever with tapered end on beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux55 = insFldX(aux48, gFld("DT cantilever with straight end on beam <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT cantilever with straight end on beam.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT cantilever with straight end on beam.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux56 = insFldX(aux48, gFld("DT&#39s bearing on BI one DT coped <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT&#39s bearing on BI one DT coped.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT&#39s bearing on BI one DT coped.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux57 = insFldX(aux48, gFld("DT&#39s bearing on BI - typical <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT&#39s bearing on BI - typical.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/DT&#39s bearing on BI - typical.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux58 = insFldX(aux48, gFld("One DT bearing on BI - future expansion <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/One DT bearing on BI - future expansion.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/One DT bearing on BI - future expansion.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux59 = insFldX(aux48, gFld("Two DT&#39s bearing half on BR <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/Two DT&#39s bearing half on BR.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee on Concrete Beams/Two DT&#39s bearing half on BR.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux60 = insFldX(aux47, gFld("Double Tee to Double Tee"))
aux61 = insFldX(aux60, gFld("Standard weld point connection <A HREF='details/Double Tee Roof/Double Tee to Double Tee/Standard weld point connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tee to Double Tee/Standard weld point connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux62 = insFldX(aux47, gFld("Double Tees on Block"))
aux63 = insFldX(aux62, gFld("Two DTs bearing on block welded <A HREF='details/Double Tee Roof/Double Tees on Block/Two DTs bearing on block welded.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Block/Two DTs bearing on block welded.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux64 = insFldX(aux62, gFld("Two DTs bearing on block <A HREF='details/Double Tee Roof/Double Tees on Block/Two DTs bearing on block.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Block/Two DTs bearing on block.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux65 = insFldX(aux62, gFld("DT bearing on block at floor <A HREF='details/Double Tee Roof/Double Tees on Block/DT bearing on block at floor.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Block/DT bearing on block at floor.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux66 = insFldX(aux62, gFld("DT bearing on block at roof <A HREF='details/Double Tee Roof/Double Tees on Block/DT bearing on block at roof.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Block/DT bearing on block at roof.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux67 = insFldX(aux62, gFld("Non-load bearing DT to block details <A HREF='details/Double Tee Roof/Double Tees on Block/Non-load bearing DT to block details.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Block/Non-load bearing DT to block details.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux68 = insFldX(aux47, gFld("Double Tees on Steel"))
aux69 = insFldX(aux68, gFld("Cantilever DT bearing on steel <A HREF='details/Double Tee Roof/Double Tees on Steel/Cantilever DT bearing on steel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Steel/Cantilever DT bearing on steel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux70 = insFldX(aux68, gFld("Double DT bearing on steel <A HREF='details/Double Tee Roof/Double Tees on Steel/Double DT bearing on steel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Steel/Double DT bearing on steel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux71 = insFldX(aux68, gFld("DT bearing on steel <A HREF='details/Double Tee Roof/Double Tees on Steel/DT bearing on steel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Roof/Double Tees on Steel/DT bearing on steel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux72 = insFldX(auxroot, gFld("Double Tee Walls"))
aux73 = insFldX(aux72, gFld("Bottom Connections "))
aux74 = insFldX(aux73, gFld("DT on foundation - tied to floor <A HREF='details/Double Tee Walls/Bottom Connections/DT on foundation - tied to floor.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT on foundation - tied to floor.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux75 = insFldX(aux73, gFld("DT stacked on block <A HREF='details/Double Tee Walls/Bottom Connections/DT stacked on block.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT stacked on block.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux76 = insFldX(aux73, gFld("DT to footing detail typical <A HREF='details/Double Tee Walls/Bottom Connections/DT to footing detail typical.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT to footing detail typical.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux77 = insFldX(aux73, gFld("DT to foundation detail typical <A HREF='details/Double Tee Walls/Bottom Connections/DT to foundation detail typical.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT to foundation detail typical.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux78 = insFldX(aux73, gFld("DT to foundation, connection outside - future expansion <A HREF='details/Double Tee Walls/Bottom Connections/DT to foundation, connection outside - future expansion.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT to foundation, connection outside - future expansion.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux79 = insFldX(aux73, gFld("DT to foundation detail future expansion <A HREF='details/Double Tee Walls/Bottom Connections/DT to foundation detail future expansion.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT to foundation detail future expansion.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux80 = insFldX(aux73, gFld("DT to footing tied to floor <A HREF='details/Double Tee Walls/Bottom Connections/DT to footing tied to floor.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT to footing tied to floor.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux81 = insFldX(aux73, gFld("DT wall stacked on flat panel <A HREF='details/Double Tee Walls/Bottom Connections/DT wall stacked on flat panel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Bottom Connections/DT wall stacked on flat panel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux82 = insFldX(aux72, gFld("Corners"))
aux83 = insFldX(aux82, gFld("DT butt corner detail with concrete column <A HREF='details/Double Tee Walls/Corners/DT butt corner detail with concrete column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Corners/DT butt corner detail with concrete column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux84 = insFldX(aux82, gFld("DT butt corner detail typical <A HREF='details/Double Tee Walls/Corners/DT butt corner detail typical.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Corners/DT butt corner detail typical.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux85 = insFldX(aux82, gFld("DT shiplap corner detail typical <A HREF='details/Double Tee Walls/Corners/DT shiplap corner detail typical.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Corners/DT shiplap corner detail typical.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux86 = insFldX(aux82, gFld("DT shiplap corner detail with concrete column <A HREF='details/Double Tee Walls/Corners/DT shiplap corner detail with concrete column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Corners/DT shiplap corner detail with concrete column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux87 = insFldX(aux72, gFld("Load Bearing"))
aux88 = insFldX(aux87, gFld("Joist bearing detail on ledge angle <A HREF='details/Double Tee Walls/Load Bearing/Joist bearing detail on ledge angle.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Load Bearing/Joist bearing detail on ledge angle.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux89 = insFldX(aux87, gFld("Joist bearing detail in pocket <A HREF='details/Double Tee Walls/Load Bearing/Joist bearing detail in pocket.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Load Bearing/Joist bearing detail in pocket.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux90 = insFldX(aux87, gFld("Joist bearing detail in scallop haunch <A HREF='details/Double Tee Walls/Load Bearing/Joist bearing detail in scallop haunch.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Load Bearing/Joist bearing detail in scallop haunch.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux91 = insFldX(aux87, gFld("DT button haunch bearing detail <A HREF='details/Double Tee Walls/Load Bearing/DT button haunch bearing detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Load Bearing/DT button haunch bearing detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux92 = insFldX(aux87, gFld("DT scallop haunch bearing detail <A HREF='details/Double Tee Walls/Load Bearing/DT scallop haunch bearing detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Load Bearing/DT scallop haunch bearing detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux93 = insFldX(aux87, gFld("H.C. bearing on ledge angle <A HREF='details/Double Tee Walls/Load Bearing/H.C. bearing on ledge angle.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Load Bearing/H.C. bearing on ledge angle.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux94 = insFldX(aux72, gFld("Miscellaneous"))
aux95 = insFldX(aux94, gFld("Recommended parapet detail <A HREF='details/Double Tee Walls/Miscellaneous/Recommended parapet detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Miscellaneous/Recommended parapet detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux96 = insFldX(aux94, gFld("Typical weld point connection <A HREF='details/Double Tee Walls/Miscellaneous/Typical weld point connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Miscellaneous/Typical weld point connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux97 = insFldX(aux94, gFld("Typical DT wall panel caulk joint <A HREF='details/Double Tee Walls/Miscellaneous/Typical DT wall panel caulk joint.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Miscellaneous/Typical DT wall panel caulk joint.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux98 = insFldX(aux72, gFld("Non-Load Bearing"))
aux99 = insFldX(aux98, gFld("DT wall tilt up to steel <A HREF='details/Double Tee Walls/Non-Load Bearing/DT wall tilt up to steel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Non-Load Bearing/DT wall tilt up to steel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux100 = insFldX(aux98, gFld("Non-load bearing DT to starter joist <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing DT to starter joist.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing DT to starter joist.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux101 = insFldX(aux98, gFld("Non-load bearing DT to DT wall connection <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing DT to DT wall connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing DT to DT wall connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux102 = insFldX(aux98, gFld("Non-load bearing overhead detail to DT <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing overhead detail to DT.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing overhead detail to DT.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux103 = insFldX(aux98, gFld("Non-load bearing DT to H.C. connection <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing DT to H.C. connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Non-Load Bearing/Non-load bearing DT to H.C. connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux104 = insFldX(aux98, gFld("DT bearing on perimeter beam to wall connection <A HREF='details/Double Tee Walls/Non-Load Bearing/DT bearing on perimeter beam to wall connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Non-Load Bearing/DT bearing on perimeter beam to wall connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux105 = insFldX(aux72, gFld("Openings"))
aux106 = insFldX(aux105, gFld("Solid concrete at head of opening detail <A HREF='details/Double Tee Walls/Openings/Solid concrete at head of opening detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Openings/Solid concrete at head of opening detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux107 = insFldX(aux105, gFld("Solid concrete at jamb of opening detail <A HREF='details/Double Tee Walls/Openings/Solid concrete at jamb of opening detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Openings/Solid concrete at jamb of opening detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux108 = insFldX(aux105, gFld("Wood nailer at head <A HREF='details/Double Tee Walls/Openings/Wood nailer at head.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Openings/Wood nailer at head.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux109 = insFldX(aux105, gFld("Wood nailer at jamb <A HREF='details/Double Tee Walls/Openings/Wood nailer at jamb.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Double Tee Walls/Openings/Wood nailer at jamb.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux110 = insFldX(auxroot, gFld("Architectural Details"))
aux111 = insFldX(aux110, gFld("Brick Details"))
aux112 = insFldX(aux111, gFld("3D thin brick assembly <A HREF='details/Architectural Details/Brick Details/3D thin brick assembly.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/3D thin brick assembly.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux113 = insFldX(aux111, gFld("Brick opening <A HREF='details/Architectural Details/Brick Details/Brick opening.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/Brick opening.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux114 = insFldX(aux111, gFld("Brick spacing section <A HREF='details/Architectural Details/Brick Details/Brick spacing section.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/Brick spacing section.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux115 = insFldX(aux111, gFld("Brick thin mitred corner - insulated panel <A HREF='details/Architectural Details/Brick Details/Brick thin mitred corner - insulated panel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/Brick thin mitred corner - insulated panel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux116 = insFldX(aux111, gFld("Brick thin mitred corner - solid panel <A HREF='details/Architectural Details/Brick Details/Brick thin mitred corner - solid panel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/Brick thin mitred corner - solid panel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux117 = insFldX(aux111, gFld("Brick transition with full mortar joint <A HREF='details/Architectural Details/Brick Details/Brick transition with full mortar joint.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/Brick transition with full mortar joint.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux118 = insFldX(aux111, gFld("Brick transition with reveal <A HREF='details/Architectural Details/Brick Details/Brick transition with reveal.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/Brick transition with reveal.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux119 = insFldX(aux111, gFld("Typical brick to brick joint <A HREF='details/Architectural Details/Brick Details/Typical brick to brick joint.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Brick Details/Typical brick to brick joint.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux120 = insFldX(aux110, gFld("Corners "))
aux121 = insFldX(aux120, gFld("Miter corner with recess connection <A HREF='details/Architectural Details/Corners/Miter corner with recess connection.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Corners/Miter corner with recess connection.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux122 = insFldX(aux120, gFld("Miter corner with steel column <A HREF='details/Architectural Details/Corners/Miter corner with steel column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Corners/Miter corner with steel column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux123 = insFldX(aux120, gFld("Miter corner with concrete column <A HREF='details/Architectural Details/Corners/Miter corner with concrete column.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Corners/Miter corner with concrete column.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux124 = insFldX(aux120, gFld("Standard miter corner <A HREF='details/Architectural Details/Corners/Standard miter corner.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Corners/Standard miter corner.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux125 = insFldX(aux110, gFld("Openings"))
aux126 = insFldX(aux125, gFld("Architectural finish around doors and windows <A HREF='details/Architectural Details/Openings/Architectural finish around doors and windows.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Openings/Architectural finish around doors and windows.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux127 = insFldX(aux125, gFld("Solid concrete architectural finish edge <A HREF='details/Architectural Details/Openings/Solid concrete architectural finish edge.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Openings/Solid concrete architectural finish edge.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux128 = insFldX(aux110, gFld("Others"))
aux129 = insFldX(aux128, gFld("Bullnose <A HREF='details/Architectural Details/Others/Bullnose.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Others/Bullnose.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux130 = insFldX(aux110, gFld("Typical Reveal "))
aux131 = insFldX(aux130, gFld("Minimum reveal between finishes <A HREF='details/Architectural Details/Typical Reveal/Minimum reveal between finishes.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Typical Reveal/Minimum reveal between finishes.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux132 = insFldX(aux130, gFld("Typical Reveal <A HREF='details/Architectural Details/Typical Reveal/Typical Reveal.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Architectural Details/Typical Reveal/Typical Reveal.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))

aux133 = insFldX(auxroot, gFld("Panel Configuration "))
aux1331 = insFldX(aux133, gFld("Double Tee"))
aux134 = insFldX(aux1331, gFld("DT wall panel <A HREF='details/Panel Configuration/Double Tee/DT wall panel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Panel Configuration/Double Tee/DT wall panel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux1341 = insFldX(aux133, gFld("Flat"))
aux135 = insFldX(aux1341, gFld("Flat wall panel <A HREF='details/Panel Configuration/Flat/Flat wall panel.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Panel Configuration/Flat/Flat wall panel.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))

aux136 = insFldX(auxroot, gFld("Flat Panel Isometric "))
aux137 = insFldX(aux136, gFld("Wall panel ISO <A HREF='details/Flat Panel Isometric/Wall panel ISO.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Flat Panel Isometric/Wall panel ISO.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux138 = insFldX(auxroot, gFld("Helpful Layout Information"))
aux139 = insFldX(aux138, gFld("Layout and opening examples <A HREF='details/Helpful Layout Information/Layout and opening examples.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Helpful Layout Information/Layout and opening examples.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))
aux140 = insFldX(aux138, gFld("Typical anchor bolt detail <A HREF='details/Helpful Layout Information/Typical anchor bolt detail.pdf' TARGET = 'RightFrame'>(<U>Acrobat PDF</U>) </A> <A HREF='details/Helpful Layout Information/Typical anchor bolt detail.zip' TARGET = '_RightFrame'>(<U>DXF</U>)</A>"))

aux141 = insFldX(auxroot, gFld("Section Types and Properties <A HREF='details/Other/Section Types and Properties.pdf' TARGET = '_RightFrame'>(<U>Acrobat PDF</U>) </A>"))

aux142 = insFldX(auxroot, gFld("Load Tables <A HREF='details/Other/Load Tables.pdf' TARGET = '_RightFrame'>(<U>Acrobat PDF</U>) </A>"))

aux1b.iconSrc = ICONPATH + "pdf2.gif"

aux2.iconSrc = ICONPATH + "w2.gif"
aux3.iconSrc = ICONPATH + "w2.gif"
aux4.iconSrc = ICONPATH + "w2.gif"
aux5.iconSrc = ICONPATH + "w2.gif"
aux6.iconSrc = ICONPATH + "w2.gif"
aux7.iconSrc = ICONPATH + "w2.gif"

aux9.iconSrc = ICONPATH + "w2.gif"
aux10.iconSrc = ICONPATH + "w2.gif"
aux11.iconSrc = ICONPATH + "w2.gif"
aux12.iconSrc = ICONPATH + "w2.gif"
aux13.iconSrc = ICONPATH + "w2.gif"

aux15.iconSrc = ICONPATH + "w2.gif"


aux18.iconSrc = ICONPATH + "w2.gif"
aux19.iconSrc = ICONPATH + "w2.gif"
aux20.iconSrc = ICONPATH + "w2.gif"
aux21.iconSrc = ICONPATH + "w2.gif"
aux22.iconSrc = ICONPATH + "w2.gif"

aux24.iconSrc = ICONPATH + "w2.gif"
aux25.iconSrc = ICONPATH + "w2.gif"
aux26.iconSrc = ICONPATH + "w2.gif"
aux27.iconSrc = ICONPATH + "w2.gif"

aux29.iconSrc = ICONPATH + "w2.gif"
aux30.iconSrc = ICONPATH + "w2.gif"
aux31.iconSrc = ICONPATH + "w2.gif"
aux32.iconSrc = ICONPATH + "w2.gif"
aux33.iconSrc = ICONPATH + "w2.gif"
aux34.iconSrc = ICONPATH + "w2.gif"
aux35.iconSrc = ICONPATH + "w2.gif"

aux37.iconSrc = ICONPATH + "w2.gif"
aux38.iconSrc = ICONPATH + "w2.gif"
aux39.iconSrc = ICONPATH + "w2.gif"
aux40.iconSrc = ICONPATH + "w2.gif"
aux41.iconSrc = ICONPATH + "w2.gif"
aux42.iconSrc = ICONPATH + "w2.gif"

aux44.iconSrc = ICONPATH + "w2.gif"
aux45.iconSrc = ICONPATH + "w2.gif"
aux46.iconSrc = ICONPATH + "w2.gif"


aux49.iconSrc = ICONPATH + "w2.gif"
aux50.iconSrc = ICONPATH + "w2.gif"
aux51.iconSrc = ICONPATH + "w2.gif"
aux52.iconSrc = ICONPATH + "w2.gif"
aux53.iconSrc = ICONPATH + "w2.gif"
aux54.iconSrc = ICONPATH + "w2.gif"
aux55.iconSrc = ICONPATH + "w2.gif"
aux56.iconSrc = ICONPATH + "w2.gif"
aux57.iconSrc = ICONPATH + "w2.gif"
aux58.iconSrc = ICONPATH + "w2.gif"
aux59.iconSrc = ICONPATH + "w2.gif"

aux61.iconSrc = ICONPATH + "w2.gif"

aux63.iconSrc = ICONPATH + "w2.gif"
aux64.iconSrc = ICONPATH + "w2.gif"
aux65.iconSrc = ICONPATH + "w2.gif"
aux66.iconSrc = ICONPATH + "w2.gif"
aux67.iconSrc = ICONPATH + "w2.gif"

aux69.iconSrc = ICONPATH + "w2.gif"
aux70.iconSrc = ICONPATH + "w2.gif"
aux71.iconSrc = ICONPATH + "w2.gif"


aux74.iconSrc = ICONPATH + "w2.gif"
aux75.iconSrc = ICONPATH + "w2.gif"
aux76.iconSrc = ICONPATH + "w2.gif"
aux77.iconSrc = ICONPATH + "w2.gif"
aux78.iconSrc = ICONPATH + "w2.gif"
aux79.iconSrc = ICONPATH + "w2.gif"
aux80.iconSrc = ICONPATH + "w2.gif"
aux81.iconSrc = ICONPATH + "w2.gif"

aux83.iconSrc = ICONPATH + "w2.gif"
aux84.iconSrc = ICONPATH + "w2.gif"
aux85.iconSrc = ICONPATH + "w2.gif"
aux86.iconSrc = ICONPATH + "w2.gif"

aux88.iconSrc = ICONPATH + "w2.gif"
aux89.iconSrc = ICONPATH + "w2.gif"
aux90.iconSrc = ICONPATH + "w2.gif"
aux91.iconSrc = ICONPATH + "w2.gif"
aux92.iconSrc = ICONPATH + "w2.gif"
aux93.iconSrc = ICONPATH + "w2.gif"

aux95.iconSrc = ICONPATH + "w2.gif"
aux96.iconSrc = ICONPATH + "w2.gif"
aux97.iconSrc = ICONPATH + "w2.gif"

aux99.iconSrc = ICONPATH + "w2.gif"
aux100.iconSrc = ICONPATH + "w2.gif"
aux101.iconSrc = ICONPATH + "w2.gif"
aux102.iconSrc = ICONPATH + "w2.gif"
aux103.iconSrc = ICONPATH + "w2.gif"
aux104.iconSrc = ICONPATH + "w2.gif"

aux106.iconSrc = ICONPATH + "w2.gif"
aux107.iconSrc = ICONPATH + "w2.gif"
aux108.iconSrc = ICONPATH + "w2.gif"
aux109.iconSrc = ICONPATH + "w2.gif"


aux112.iconSrc = ICONPATH + "w2.gif"
aux113.iconSrc = ICONPATH + "w2.gif"
aux114.iconSrc = ICONPATH + "w2.gif"
aux115.iconSrc = ICONPATH + "w2.gif"
aux116.iconSrc = ICONPATH + "w2.gif"
aux117.iconSrc = ICONPATH + "w2.gif"
aux118.iconSrc = ICONPATH + "w2.gif"
aux119.iconSrc = ICONPATH + "w2.gif"

aux121.iconSrc = ICONPATH + "w2.gif"
aux122.iconSrc = ICONPATH + "w2.gif"
aux123.iconSrc = ICONPATH + "w2.gif"
aux124.iconSrc = ICONPATH + "w2.gif"

aux126.iconSrc = ICONPATH + "w2.gif"
aux127.iconSrc = ICONPATH + "w2.gif"

aux129.iconSrc = ICONPATH + "w2.gif"

aux131.iconSrc = ICONPATH + "w2.gif"
aux132.iconSrc = ICONPATH + "w2.gif"

aux134.iconSrc = ICONPATH + "w2.gif"
aux135.iconSrc = ICONPATH + "w2.gif"

aux137.iconSrc = ICONPATH + "w2.gif"

aux139.iconSrc = ICONPATH + "w2.gif"
aux140.iconSrc = ICONPATH + "w2.gif"

aux141.iconSrc = ICONPATH + "pdf2.gif"

aux142.iconSrc = ICONPATH + "pdf2.gif"


aux1b.iconSrcClosed = ICONPATH + "pdf2.gif"

aux2.iconSrcClosed = ICONPATH + "w2.gif"
aux3.iconSrcClosed = ICONPATH + "w2.gif"
aux4.iconSrcClosed = ICONPATH + "w2.gif"
aux5.iconSrcClosed = ICONPATH + "w2.gif"
aux6.iconSrcClosed = ICONPATH + "w2.gif"
aux7.iconSrcClosed = ICONPATH + "w2.gif"

aux9.iconSrcClosed = ICONPATH + "w2.gif"
aux10.iconSrcClosed = ICONPATH + "w2.gif"
aux11.iconSrcClosed = ICONPATH + "w2.gif"
aux12.iconSrcClosed = ICONPATH + "w2.gif"
aux13.iconSrcClosed = ICONPATH + "w2.gif"

aux15.iconSrcClosed = ICONPATH + "w2.gif"


aux18.iconSrcClosed = ICONPATH + "w2.gif"
aux19.iconSrcClosed = ICONPATH + "w2.gif"
aux20.iconSrcClosed = ICONPATH + "w2.gif"
aux21.iconSrcClosed = ICONPATH + "w2.gif"
aux22.iconSrcClosed = ICONPATH + "w2.gif"

aux24.iconSrcClosed = ICONPATH + "w2.gif"
aux25.iconSrcClosed = ICONPATH + "w2.gif"
aux26.iconSrcClosed = ICONPATH + "w2.gif"
aux27.iconSrcClosed = ICONPATH + "w2.gif"

aux29.iconSrcClosed = ICONPATH + "w2.gif"
aux30.iconSrcClosed = ICONPATH + "w2.gif"
aux31.iconSrcClosed = ICONPATH + "w2.gif"
aux32.iconSrcClosed = ICONPATH + "w2.gif"
aux33.iconSrcClosed = ICONPATH + "w2.gif"
aux34.iconSrcClosed = ICONPATH + "w2.gif"
aux35.iconSrcClosed = ICONPATH + "w2.gif"

aux37.iconSrcClosed = ICONPATH + "w2.gif"
aux38.iconSrcClosed = ICONPATH + "w2.gif"
aux39.iconSrcClosed = ICONPATH + "w2.gif"
aux40.iconSrcClosed = ICONPATH + "w2.gif"
aux41.iconSrcClosed = ICONPATH + "w2.gif"
aux42.iconSrcClosed = ICONPATH + "w2.gif"

aux44.iconSrcClosed = ICONPATH + "w2.gif"
aux45.iconSrcClosed = ICONPATH + "w2.gif"
aux46.iconSrcClosed = ICONPATH + "w2.gif"


aux49.iconSrcClosed = ICONPATH + "w2.gif"
aux50.iconSrcClosed = ICONPATH + "w2.gif"
aux51.iconSrcClosed = ICONPATH + "w2.gif"
aux52.iconSrcClosed = ICONPATH + "w2.gif"
aux53.iconSrcClosed = ICONPATH + "w2.gif"
aux54.iconSrcClosed = ICONPATH + "w2.gif"
aux55.iconSrcClosed = ICONPATH + "w2.gif"
aux56.iconSrcClosed = ICONPATH + "w2.gif"
aux57.iconSrcClosed = ICONPATH + "w2.gif"
aux58.iconSrcClosed = ICONPATH + "w2.gif"
aux59.iconSrcClosed = ICONPATH + "w2.gif"

aux61.iconSrcClosed = ICONPATH + "w2.gif"

aux63.iconSrcClosed = ICONPATH + "w2.gif"
aux64.iconSrcClosed = ICONPATH + "w2.gif"
aux65.iconSrcClosed = ICONPATH + "w2.gif"
aux66.iconSrcClosed = ICONPATH + "w2.gif"
aux67.iconSrcClosed = ICONPATH + "w2.gif"

aux69.iconSrcClosed = ICONPATH + "w2.gif"
aux70.iconSrcClosed = ICONPATH + "w2.gif"
aux71.iconSrcClosed = ICONPATH + "w2.gif"


aux74.iconSrcClosed = ICONPATH + "w2.gif"
aux75.iconSrcClosed = ICONPATH + "w2.gif"
aux76.iconSrcClosed = ICONPATH + "w2.gif"
aux77.iconSrcClosed = ICONPATH + "w2.gif"
aux78.iconSrcClosed = ICONPATH + "w2.gif"
aux79.iconSrcClosed = ICONPATH + "w2.gif"
aux80.iconSrcClosed = ICONPATH + "w2.gif"
aux81.iconSrcClosed = ICONPATH + "w2.gif"

aux83.iconSrcClosed = ICONPATH + "w2.gif"
aux84.iconSrcClosed = ICONPATH + "w2.gif"
aux85.iconSrcClosed = ICONPATH + "w2.gif"
aux86.iconSrcClosed = ICONPATH + "w2.gif"

aux88.iconSrcClosed = ICONPATH + "w2.gif"
aux89.iconSrcClosed = ICONPATH + "w2.gif"
aux90.iconSrcClosed = ICONPATH + "w2.gif"
aux91.iconSrcClosed = ICONPATH + "w2.gif"
aux92.iconSrcClosed = ICONPATH + "w2.gif"
aux93.iconSrcClosed = ICONPATH + "w2.gif"

aux95.iconSrcClosed = ICONPATH + "w2.gif"
aux96.iconSrcClosed = ICONPATH + "w2.gif"
aux97.iconSrcClosed = ICONPATH + "w2.gif"

aux99.iconSrcClosed = ICONPATH + "w2.gif"
aux100.iconSrcClosed = ICONPATH + "w2.gif"
aux101.iconSrcClosed = ICONPATH + "w2.gif"
aux102.iconSrcClosed = ICONPATH + "w2.gif"
aux103.iconSrcClosed = ICONPATH + "w2.gif"
aux104.iconSrcClosed = ICONPATH + "w2.gif"

aux106.iconSrcClosed = ICONPATH + "w2.gif"
aux107.iconSrcClosed = ICONPATH + "w2.gif"
aux108.iconSrcClosed = ICONPATH + "w2.gif"
aux109.iconSrcClosed = ICONPATH + "w2.gif"


aux112.iconSrcClosed = ICONPATH + "w2.gif"
aux113.iconSrcClosed = ICONPATH + "w2.gif"
aux114.iconSrcClosed = ICONPATH + "w2.gif"
aux115.iconSrcClosed = ICONPATH + "w2.gif"
aux116.iconSrcClosed = ICONPATH + "w2.gif"
aux117.iconSrcClosed = ICONPATH + "w2.gif"
aux118.iconSrcClosed = ICONPATH + "w2.gif"
aux119.iconSrcClosed = ICONPATH + "w2.gif"

aux121.iconSrcClosed = ICONPATH + "w2.gif"
aux122.iconSrcClosed = ICONPATH + "w2.gif"
aux123.iconSrcClosed = ICONPATH + "w2.gif"
aux124.iconSrcClosed = ICONPATH + "w2.gif"

aux126.iconSrcClosed = ICONPATH + "w2.gif"
aux127.iconSrcClosed = ICONPATH + "w2.gif"

aux129.iconSrcClosed = ICONPATH + "w2.gif"

aux131.iconSrcClosed = ICONPATH + "w2.gif"
aux132.iconSrcClosed = ICONPATH + "w2.gif"

aux134.iconSrcClosed = ICONPATH + "w2.gif"
aux135.iconSrcClosed = ICONPATH + "w2.gif"

aux137.iconSrcClosed = ICONPATH + "w2.gif"

aux139.iconSrcClosed = ICONPATH + "w2.gif"
aux140.iconSrcClosed = ICONPATH + "w2.gif"

aux141.iconSrcClosed = ICONPATH + "pdf2.gif"

aux142.iconSrcClosed = ICONPATH + "pdf2.gif"


foldersTree.treeID = "L1"