SEE Tracker Entries
| Name | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |
|---|---|---|---|---|---|---|---|---|---|---|
| Ron Barnick | Wells | Steel shop. KRB | 03/05/2021 | 7 | Unsafe Operation | Bar benders pilled a load of bar on the 240 volt cord. | Needs Attention | View / Edit Details | ||
| Nate Kuiper | Wells | main plant | 03/01/2021 | 7 | Other | There are multiple employees on multiple beds that wear there masks around there neck not there faces most of the day | Needs Attention | View / Edit Details | ||
| Rick Johnson | Wells | Yard | 02/26/2021 | 11 | Other | Piece 852 Job 7269. Today when we were off-loading this piece it should of weighed 61,555lbs and we had 69,700. After you subtract the rigging ( 3,000 lbs) the piece weighed 66,700lbs which is 5145 lbs more then the tag says. we were boomed up as much as we could without hitting the crane with the piece. With our yard being so full where we had to offload it off the side of the crain so we were right on the line if the piece weighed what it was supposed to | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | West Carpenter shop | 02/24/2021 | 12 | Other | Joe Maxwell was exposed to COVID positive individual | Needs Attention | View / Edit Details | ||
| Rick Johnson | Wells | Yard | 02/18/2021 | 11 | Other | Today When we were pickup up piece 313 for maple river (7269) it was listed at 62,770lbs the scale weighed it at 69,300lbs after you subtract the rigging 3000lb the piece weighed in at 66,300lbs that is 3530lbs more then the tag said. We have had a lot of pieces that are running heavy lately and its not usually a problem when we are moving pieces in the 30,000-50,000 but when they are 60,000lbs + it puts us in a very dangerous situation | Needs Attention | View / Edit Details | ||
| Robert C | Wells | Building 3 | 02/17/2021 | 8 | Unsafe Operation | Landing gear on trailer bad ( 8066) | Needs Attention | View / Edit Details | ||
| Chas Jacobson | Wells | Main Batch Ramp & QC Lab | 02/15/2021 | 9 | Other | QC noticed beam supporting loader ramp is cracked and deteriorating. Steel is exposed and rusted. | Needs Attention | View / Edit Details | ||
| C.J. Meyer | Wells | Under batch plant/wash out area | 02/12/2021 | 8 | Fall Hazard | Very slippery from the cold air coming in through the wash-out drain and freezing the water that's on the ground. | Needs Attention | View / Edit Details | ||
| Brian Schultze | Wells | building 3 | 02/11/2021 | 5 | Unsafe Operation | Chain hook up to a panel on the stand up trailer broke. see picture | Needs Attention | View / Edit Details | ||
| Brady K | Wells | FS22 | 02/10/2021 | 10 | Other | Cable pulling Jack 1 in west plant has faulty safety switch/cut wiring which prevents safety door from working. | Needs Attention | View / Edit Details | ||
| Julio Ambriz | Wells | B5 | 02/10/2021 | 8 | Housekeeping | @ South End Of beam Cable is laying by Ramp, its causing a tripping Hazard | Needs Attention | View / Edit Details | ||
| NATE KUIPER | Wells | DT-9/DT7 | 02/10/2021 | 10 | Unsafe Operation | ON THE DROTT STRONG Back two of the three clevises that hold the lift chains the threaded pins weren't screwed in all the way and the crew was using them to lift pieces | Needs Attention | View / Edit Details | ||
| Robert | Wells | Building 3 | 02/08/2021 | 6 | Unsafe Operation | Trailer red tagged as having bad landing gear. Tag is visible. Still got used and had 23.5 ton panel put on. | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | Metal Shop | 02/08/2021 | 12 | Other | Frank Gonzalez' son is being tested for COVID | Needs Attention | View / Edit Details | ||
| Brady K | Wells | West Carpenter Shop | 02/08/2021 | 7 | Unsafe Operation | Carpenter shop in the west plant had the band saw running with nobody using it. John was not present in area and Joe was over using the table saw | Needs Attention | View / Edit Details | ||
| Brady K | Wells | West Plant | 02/08/2021 | 6 | PPE | Ready Mix driver Bruce does not wear side shields on his glasses. Even when out of the truck. | Needs Attention | View / Edit Details | ||
| Nate Kuiper | Wells | DT9 | 02/03/2021 | 9 | Fall Hazard | north west side of the catwalk from 33ft to 60 ft has busted angle iron in spots, The mesh is broke free from the angle so that you could fall thru, and is sticking up in spots so that you can trip on it and fall. | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | FS 25 | 02/02/2021 | 12 | Other | James Rivera was exposed to COVID, is being tested | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | Carpenter Shop | 01/27/2021 | 12 | Other | Bob Eckright is being tested for COVID. Took rapid and it was negative, but still does not feel well and has no taste or smell. Bob is Positive. | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | Drafter | 01/26/2021 | 12 | Other | Mandy Possin has tested positive for COVID. | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | FS 24 | 01/25/2021 | 12 | Other | Rob Goldman reports no taste or smell after work. went for rapid test. Positive results at 3pm. | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | Patch Building | 01/25/2021 | 12 | Other | Darin Clay's wife has been tested for COVID. | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | Batch Plant | 01/20/2021 | 12 | Other | Brandon Nield's wife is being tested for COVID. | Needs Attention | View / Edit Details | ||
| Corey Olson | Wells | Lean | 01/19/2021 | 12 | Other | Adam Gimberlines' wife is positive for COVID. | Needs Attention | View / Edit Details | ||
| Brian Schultze | Wells | building 3 | 01/12/2021 | 9 | Fall Hazard | On the FS19 are pouring floor flats. The carpenter must not be cutting the plywood for the openings to cover the holes. Or the crew aren't putting the plywood on the panel after it is stripped out. The patch crew most of the time put the plywood over the opening and screw it down after the opening is finished. If we do not catch it in building 3 or out in the yard. The panel can go to the job site and someone can fall throw the opening or tools fall through it. | Needs Attention | View / Edit Details | ||
| Name | Site | Area | Date | Ttl | Safety Topic | Root Causes | Status | Respirator User Name | Completion Date | Entry |